ct7-1.jpg (15600 bytes)

CT-7 SERIES:

WATERPROOF TYPE
This thermostat is watertight for low and medium temperature uses. When used in a moist environment, this thermostat is extremely reliable and the hermetic seal helps resist aging caused by hot and cold cycling.

EXCELLENT HEAT SENSITIVITY
The CT-7 and CT-7B are designed so that the heat sensing surface can be brought into direct contact with the heating element, thereby sensing temperature changes quickly.

LEAD WIRE LENGTH
Standard lead length is 150 mm; however, lead length may be varied according to customer specifications.

SPECIFICATION
Electrical Rating AC 125/250V 10/5A resistive load
Operating Temperature -20°C~ 110°C
Differential Minimum 10°C, Normally 15°C~25&176;C
Tolerance More than ±3°C (±5°C standard)
Dielectric Strength AC1,500V for 1 minute (in water)
Insulation Resistance More than 100MOhm(at DC 500V) (in water)
Contact Resistance Less than 50mOhm (lead wire resistance not included)
Heat Resistance 110°C

 

ct7-2.jpg (10669 bytes)

 

Copyright © 2004 Wako Electronics-USA. All rights reserved.  Web site developed by Kirven Advertising Inc.